Arduino ARD-043, PAM8403 мини дигитален појачувач

• - Operating voltage: 2.5V~5.5V
• - Speaker With: 4~8ohms, recommended: 4ohms
• - Speaker Power: 2~8W
• - Can use the computer USB port 5V power supply or using a mobile phone charger USB port 5V power supply, battery power can also be used
• - High efficiency: 90%, can provide 3W (left channel)+3W (right channel) output power under 4ohm load and 5V power supply conditions; Class A, class B amplifier efficiency is only about 30%
• - Class D amplifier is highly respected today, class D amplifier efficiency is extremely high, sound quality won't be affected due to increasing temperature; Do not need heat sink and take less space
• - Noise canceling circuit was built in the amplifier board, no pop noise when power on / off; With short-circuit current protection and over-temperature protection

Note: Must connect speaker first, then power on, or chip may be damaged; Do not input too large audio signal larger; Output port negative of left / right channel can not be in parallel; Max. working voltage: 5.5V