Arduino ARD-129, Температурен контролер -50+110°C XH-W1219 Temperature Controller
Бренд:ARDUINO
Продавач:АЛФА ЕЛЕКТРОНИК
500ДЕН
Ананас. Е-трговец број 1 во Северна Македонија.
Најдобра вредност за парите 2025/2026 од СЕРТИФИКАТ .
Трговецот потврдува постоење на законска гаранција за сообразност на стоката.
Parameter:
Model: XH-W1219
Control range: -50°C to 110°C
Control accuracy: 0.1°C
Measurement input: NTC10K waterproof sensor L=0.5M
High temperature alarm: -49°C to 110°C
Input voltage: DC 12V
Output type: relay output up to 10A
Return difference setting: 0.1°C to 30°C
Delayed start: 0-10 minutes
Temperature correction: -10°C to +10°C
Size: 60*43*16mm (length*width*height)
P0.Temperature Control Mode:when first use this product;if it is used to heating,please set H,if used to cooling,please set C
P1.Return Difference Setting:long press SET key entering into internal setting,choose P1 seting;then press SET key to achieve return difference value setting
P2:Temperature Calibration:this function is for temperature calibration.If detection temperature and actual temperature is different,then usrs can apply this function to calibrate
P3:Delay Start:this function is for compressor cooling
P4:Set High Temperature Alarm Value:when actual temperature is higher than this value,screen will flash and sound an alarm
